ITAR-registered suppliers. MIL-SPEC materials and finishes available.
ITAR-Compliant CNC Machining for Oshkosh Defense Suppliers
Tier-1 and tier-2 suppliers to Oshkosh Corporation’s JLTV program demand tight tolerances, MIL-SPEC materials, and zero supply chain surprises. We deliver all three.
Oshkosh, Wisconsin is ground zero for military vehicle production. Oshkosh Corporation builds the Joint Light Tactical Vehicle here, and the supplier network feeding that program runs deep across the Fox Valley. Precision CNC machined components — brackets, housings, structural weldments, drivetrain hardware — move through this ecosystem daily. Nimble connects defense contractors and tier suppliers in the Oshkosh area to our certified partner network of ITAR-registered machine shops capable of holding MIL-SPEC tolerances on aluminum, steel, titanium, and high-strength alloys. Quotes in 24 hours. CMM inspection and first article included.
Oshkosh Corporation’s defense division generates billions in contract value annually, and the suppliers clustered across Winnebago County and the broader Fox Valley corridor are under constant pressure to deliver qualified parts fast. Wisconsin’s dense precision manufacturing base — ranked among the highest per capita in the US — means local procurement teams know what good looks like. Our certified partner network is built to meet that bar on ITAR-controlled programs.
Industries Served
Defense Vehicle & Ground Mobility Systems (JLTV, LTAS program suppliers)Military Ground Support Equipment & Armored Systems ComponentsAerospace & Defense Electronics Housings and Structural HardwareGovernment Contractor Tier-1/2 Precision Component Supply
Certification Note
ITAR-registered suppliers. MIL-SPEC materials and finishes available.
// Why Nimble
Precision without the procurement headache.
→ ITAR-registered partner shops — compliant sourcing for classified-adjacent defense programs from day one
→ MIL-SPEC materials in stock: 6061-T6, 7075-T651, 4130 chromoly, 17-4 PH stainless, and titanium Grade 5
→ CMM inspection and First Article Inspection reports included — no upcharges, no negotiating
→ 24-hour quote turnaround built for defense procurement timelines, not standard job shop lead times
→ Free DFM review on every quote catches producibility issues before they become schedule problems
// FAQ
Common questions about CNC Machining for Defense & Military in Oshkosh, WI.
Are your partner shops ITAR-registered for defense work tied to Oshkosh Corporation programs?
Yes. Every partner shop in our network that handles defense work is ITAR-registered with the U.S. Department of State Directorate of Defense Trade Controls. This is a baseline requirement — not an add-on — for any component touching JLTV-adjacent or other controlled defense programs.
Can you machine components to MIL-SPEC dimensional and material requirements?
Correct. Our certified partner network machines to MIL-SPEC drawing callouts including MIL-DTL-38999 connector housings, MIL-A-8625 anodize specifications, and structural components requiring ASTM and AMS material certs. Material certifications and traceability documentation are available on every order.
What surface finishes do you offer for defense hardware?
We support MIL-SPEC finishes including hard anodize (MIL-A-8625 Type III), chemical film / Alodine (MIL-DTL-5541), electroless nickel, zinc phosphate, and black oxide. Powder coat and Cerakote are also available for ground vehicle components. All finishing is performed by certified partner facilities with documented process controls.
How do you handle First Article Inspection for defense supplier qualification?
CMM inspection and a full First Article Inspection report are included on every order — no additional charge. Reports are formatted to AS9102 standards and include dimensional ballooning, material certs, and process documentation. For Oshkosh-area suppliers managing PPAP or FAIR submissions, we can align deliverables to your specific program requirements.
What lead times should defense procurement teams in Oshkosh expect?
Standard production lead times run 5–15 business days depending on complexity, material, and finish. Expedite options are available. Quotes are turned in 24 hours from receipt of a complete RFQ package including drawing, material callout, and quantity. For recurring production orders tied to JLTV or other vehicle programs, we can establish blanket order agreements to stabilize your supply chain.
// Request a Quote
Tell us about your project.
Upload your drawings or CAD files and we’ll respond with a detailed quote within 24 hours. No NDA required to get started.
