AS9100 Rev D certified partner shops. ITAR-registered suppliers available.
Sheet Metal Fabrication in Santa Ana for Aerospace & Defense
AS9100 Rev D certified partner shops serving avionics enclosures, structural brackets, and flight-critical assemblies across the 405/55 corridor. Quotes in 24 hours.
Santa Ana sits at the heart of Orange County’s tier-2 aerospace supplier base. Companies like Boeing’s satellite division in El Segundo, Ducommun in Gardena, and dozens of avionics OEMs within 30 miles depend on precision sheet metal from this corridor. Our certified partner network delivers laser-cut, formed, and welded aluminum and stainless assemblies built to AS9100 Rev D standards with full material traceability. Every quote includes free DFM review and CMM inspection — no shortcuts on flight-critical hardware.
Santa Ana’s Role in Southern California Aerospace Supply Chain
The 405/55 interchange puts Santa Ana-area suppliers within a one-hour drive of major primes including Northrop Grumman in Azusa, Parker Hannifin in Irvine, and L3Harris facilities across Los Angeles. This dense tier-2 ecosystem demands certified, responsive fabricators who understand AS9100 documentation requirements and ITAR handling. Our certified partner network is built specifically to serve that demand.
Industries Served
Avionics & Airborne Electronics — enclosures, chassis, and rack hardware for OEMs in the 405/55 corridorAerospace Structural — brackets, frames, and skins supporting tier-1 primes like Ducommun and Spirit AeroSystems supply chainsDefense Systems & Ground Support — enclosures and panels for radar, EW, and ground vehicle programs with ITAR handlingSpace & Satellite — precision sheet metal assemblies for commercial and government space programs active across Southern California
Certification Note
AS9100 Rev D certified partner shops. ITAR-registered suppliers available.
// Why Nimble
Precision without the procurement headache.
→ AS9100 Rev D certified partner shops — ready for avionics enclosures, structural brackets, and ECS components without re-qualification overhead
→ ITAR-registered suppliers available for export-controlled programs common among Santa Ana-area defense primes and sub-tier contractors
→ 24-hour quote turnaround with free DFM — critical when you’re supporting a build cycle tied to a Northrop or Boeing program schedule
→ CMM inspection and First Article Inspection included on every order — full dimensional reporting for flight-critical sheet metal assemblies
→ Material traceability from mill cert to finished part — meets the documentation requirements of AS9100 and MIL-spec procurement packages
// FAQ
Common questions about Sheet Metal Fabrication for Aerospace & Defense in Santa Ana, CA.
Can your partner shops support ITAR-controlled sheet metal programs for Santa Ana-area defense contractors?
Yes. We have ITAR-registered suppliers in our certified partner network. If your program involves export-controlled materials, drawings, or end-use applications — common for defense subcontractors in Orange County — we handle the documentation requirements properly from day one.
What sheet metal materials do you run for aerospace applications in Southern California?
Our certified partner network regularly runs 5052 and 6061 aluminum, 304 and 316 stainless steel, and titanium for flight-critical and structural applications. If your design specifies a material per a Boeing or Northrop BPS spec, send us the drawing and we’ll confirm availability on your DFM review.
Do your partners provide First Article Inspection reports for avionics enclosure programs?
Yes. FAI and CMM inspection are included on every order — not an upsell. For avionics enclosures and structural brackets going into AS9100 programs, we provide full dimensional reports you can submit directly to your prime or quality team.
How quickly can Nimble quote a sheet metal assembly for an active aerospace program in Santa Ana?
Upload your drawing and 3D file at nimblemfg.co and you’ll have a quote within 24 hours. If your program is time-sensitive — a build cycle tied to a Parker Hannifin or L3Harris delivery schedule — call us directly at +1 (872) 347-2224 and we’ll expedite.
We’re a tier-2 supplier in the 405/55 corridor. Can Nimble handle low-to-mid volume production, not just prototypes?
Absolutely. Our certified partner network is built for production runs typical of aerospace tier-2 suppliers — think 25 to 500 pieces with full lot traceability, repeat orders, and consistent quality documentation. We’re not a prototype-only operation. Contact us at quote@nimblemfg.co to discuss your program volume.
// Request a Quote
Tell us about your project.
Upload your drawings or CAD files and we’ll respond with a detailed quote within 24 hours. No NDA required to get started.
